Wardrobe Builder | Glide and Slide

Your current price Final price calculated upon completion.

Self Installation Wardrobe Configurator

Dimensions

Take care when measuring up, it is important that your measurements are accurate in order for you to get the perfect fit on your new wardrobe.

Enter The Required Sizes

Width Measure in two places top and bottom and measure wall to wall above any skirting board. Same applies to coving. Both top and bottom track are supplied cut to size, so it is important correct sizes are supplied. Wardrobes can be configured with widths between 1100mm and 5000mm.

Height Consider levelling up the floor before you take your measurements. Our optional bottom liner will allow you to level up 10mm using packers. If you have carpet fitted, compress as much as possible. You can lay the bottom track and liner onto carpet but be aware you may catch a thread. If the height is over 2485mm we recommend building a drop-down bulkhead with timber. Our sliding wardrobe systems are bottom rolling so there is no load on the ceiling. The top track system will accommodate up to 10mm variance in heights. Measure in at least three places centre and both sides and always give us the smallest dimension. Wardrobes can be configured with heights between 1100mmm and 2485mm.

Depth

Our wardrobes have a default depth of 610mm. This is our standard and recommended sizing. If unsuitable and an alternative depth is required, please contact us.

Not sure how to measure up?

Please use our step by step measuring instructions.

Is your ceiling height over 2485mm?

If over this height, please contact us for options.

Range

Choose from Trent (Coated Steel), Avon (Aluminium) or Thames (Aluminium) below.

Trent our entry range, which is the most cost effective steel frame system.
10 steel frame colour choices:
Silver / White / Black / Oak / Pearwood / Truffle Avola / Cream / Satin Gold / Stone Grey / Graphite

The Avon range is the entry point into Aluminium that is Stylish & sleek.

7 aluminium frame colour choices:
Natural Silver / Polished Silver / White / Graphite / Champagne / Black / Stone Grey

The Thames range is the high end Aluminium profiling elegantly featured.
7 aluminium frame colour choices:
Natural Silver / Polished Silver / White / Graphite / Champagne / Black / Stone Grey

Select a Range

Trent

Avon

Thames

No. of Doors

Please select the number of doors you would like for your wardrobe.

Number of Doors The number of doors you choose will affect the width of the opening for you to access the wardrobe. It is always best to balance the look of your wardrobe with practicality.

Door Panel Design

Select your panel design for each door.

Door Panel Material

Select the material/colour for each panel of each door. MFC is a laminated wood product with matching edging to suit colour. Note, all glass is safety backed.

Frame Colours

Choose a frame colour from the range below.

Select A Frame Colour

End Panels

End panels are required if you won’t have a wall either side of your wardrobe. The end panel forms a side for your wardrobe where a wall can’t be used. Please select quantity needed below.

Do you require end panels? End panels are supplied at 610mm wide x 2800mm (18mm) long, they are required when you want your wardrobe door set to finish part way across the room (instead of wall to wall), these are supplied in matching colour to your liners and will require trimming to length and even scribing to the wall, if is not straight.

Liners

Liners are 90mm x 18mm x 2800mm laminated and edged MFC. They are used all around the door set to add strength and a straight edge. They will require trimming to length and may require packing to ensure they are plumb/level against the walls or along the ceiling and floor.

Do you require door liner(s)?

Interior Layout

If you would like an interior layout, please choose from the selection below.

Stand-Alone Bedroom Furniture

Tower/Unit Specification 18mm MFC, 16mm Drawer Bases and Backs, Metal Drawer Sides, High Quality Soft Close Feature Available on all Drawers.

Handle Specification Brushed Nickle, Overall Length 154mm, Height 30mm, Width 7mm, Centres 128mm

Review Your Build

Please now review your build and continue to the payment page when you are happy to proceed.

Please note: Prices do not include VAT and DELIVERY at this point.